● [Đầy đủ CO + CQ]
● [Bảo Hành: Chính hãng 12 tháng]
● [Kho hàng: Stock sẵn]
● [Vận Chuyển: Miễn phí nội thành Hà Nội]
● [Liên hệ HOTLINE để có giá tốt nhất]
ĐẶC ĐIỂM KỸ THUẬT
Thông tin hàng hóa | Chi tiết |
Bảo hành: | |
Vận chuyển | Liên hệ |
Bộ điều hợp cổng Cisco SPA112 – Giải pháp VoIP đáng tin cậy
Cisco SPA112 là bộ điều hợp cổng VoIP chất lượng cao, giúp kết nối điện thoại analog và máy fax truyền thống với dịch vụ thoại qua Internet (VoIP) một cách dễ dàng và hiệu quả. Thiết bị này mang lại sự linh hoạt cho doanh nghiệp nhỏ, văn phòng tại nhà cũng như người dùng cá nhân muốn chuyển đổi sang công nghệ thoại IP mà vẫn tận dụng được các thiết bị sẵn có.
Ưu điểm nổi bật của Cisco SPA112:
-
Hai cổng điện thoại tiêu chuẩn: Cho phép kết nối đồng thời điện thoại analog hoặc máy fax với dịch vụ VoIP, mỗi cổng có thể cấu hình độc lập.
-
Dễ dàng triển khai: Cài đặt nhanh chóng, giao diện quản lý trực quan.
-
Bảo vệ đầu tư thiết bị hiện tại: Tận dụng và mở rộng giá trị của điện thoại analog, loa hội nghị và máy fax hiện có.
-
Thiết kế nhỏ gọn, tiêu chuẩn quốc tế: Hoạt động ổn định trong nhiều môi trường, từ hộ gia đình, văn phòng nhỏ đến hệ thống IP-PBX doanh nghiệp.
-
Độ tin cậy cao: Hỗ trợ tính năng bảo mật nâng cao, đảm bảo chất lượng dịch vụ thoại và dữ liệu.
Cisco SPA112 mang đến giải pháp kinh tế, dễ dùng, đáng tin cậy để doanh nghiệp cải thiện khả năng kết nối, phục vụ khách hàng tốt hơn và tăng hiệu quả vận hành.
Thông số kĩ thuật chi tiết Thiết bị định tuyến Router Cisco SPA112
Thông số kỹ thuật | Mô tả |
Data networking | MAC address (IEEE 802.3) |
IPv4 (RFC 791) upgradeable to IPv6 (RFC 1883) | |
Address Resolution Protocol (ARP) | |
Domain Name System (DNS) A record (RFC 1706) and SRV record (RFC 2782) | |
Dynamic Host Configuration Protocol (DHCP) client (RFC 2131) | |
Point-to-Point Protocol over Ethernet (PPoE) client (RFC 2516) | |
Internet Control Message Protocol (ICMP) (RFC 792) | |
TCP (RFC 793) | |
User Datagram Protocol (UDP) (RFC 768) | |
Real Time Protocol (RTP) (RFC 1889) (RFC 1890) | |
Real Time Control Protocol (RTCP) (RFC 1889) | |
VLAN tagging (IEEE 802.1p) | |
Simple Network Time Protocol (SNTP) (RFC 2030) | |
SIP channels support for both UDP and TCP transport | |
Voice gateway | SIPv2 (RFC 3261, 3262, 3263, and 3264) |
SIP proxy redundancy: Dynamic through use of DNS SRV A records | |
Reregistration with primary SIP proxy server | |
SIP support in network address translation (NAT) networks (including Serial Tunnel [STUN]) | |
Highly secure (encrypted) calling using Secure RTP (SRTP) | |
Codec name assignment | |
G.711 (A-law and μ-law) | |
G.726 (32 kbps) | |
G.729 A | |
Dynamic payload | |
Adjustable audio frames per packet | |
Dual-tone multifrequency (DTMF): In-band and out-of-band (RFC 2833) (SIP information) | |
Voice features | Independent configurable dial plans with interdigit timers and IP dialing (1 per port) |
Call progress tone generation | |
Jitter buffer: Adaptive | |
Frame loss concealment | |
Full-duplex audio | |
Echo cancellation (G.165 and G.168) | |
Voice activity detection (VAD) | |
Silence suppression | |
Comfort noise generation (CNG) | |
Attenuation and gain adjustments | |
Flash hook timer | |
Message waiting indicator (MWI) tones | |
Visual messaging waiting indicator (VMWI) using frequency shift keying (FSK) | |
Polarity control | |
Hook flash event signaling | |
Caller ID generation (name and number): Bellcore, DTMF, and European Telecommunications Standards Institute (ETSI) | |
Streaming audio server: Up to 10 sessions | |
Music on hold | |
Call waiting, call waiting and caller ID | |
Caller ID with name and number | |
Caller ID blocking | |
Selective and anonymous call rejection | |
Call forwarding: No answer, busy, and all | |
Do not disturb | |
Call transfer, call return, and call back on busy | |
Three-way conference calling with local mixing | |
Per-call authentication and associated routing | |
Call blocking with toll restriction | |
Distinctive ringing: Calling and called number | |
Off-hook warning tone | |
Advanced inbound and outbound call routing | |
Hotline and warmline calling | |
Long silence (configurable time setting) silence threshold | |
Disconnect tone (for example, reorder tone) | |
Configurable ring frequency | |
Ring validation time setting | |
Tip and ring voltage adjustment setting | |
Ring indication delay setting | |
Fax capability | Fax tone detection pass-through |
Fax pass-through using G.711 | |
Real-time fax over IP using T.38 fax relay (T.38 support is dependent on fax machine and network and transport resilience) | |
Bảo mật | Password-protected system reset to factory default |
Password-protected administrator and user access authority | |
Provisioning, configuration, and authentication | |
HTTPS with factory-installed client certificate | |
HTTP digest: Encrypted authentication using MD5 (RFC 1321) | |
Up to 256-bit Advanced Encryption Standard (AES) encryption | |
SIP Transport Layer Security (TLS) | |
Provisioning, administration, and maintenance | Web browser administration and configuration using integral web server |
Telephone keypad configuration with interactive voice prompts | |
Automated provisioning and upgrade using HTTPS, HTTP, and Trivial File Transfer Protocol (TFTP) | |
TR-069 | |
Asynchronous notification of upgrade availability using Notify | |
Nonintrusive, in-service upgrades | |
Report generation and event logging | |
Statistics in Bye message | |
Debug server records and syslog: Per-line configurable web browser | |
Ping and traceroute diagnostics | |
Configuration management: Backup and restore | |
Support for Bonjour | |
Physical interfaces | 1 WAN 100BASE-T RJ-45 Ethernet Port (IEEE 802.3) |
2 RJ-11 FXS phone ports for analog circuit telephone device (tip and ring) | |
Reset button | |
Subscriber line interface circuit (SLIC) | Ring voltage: 40-90 Vpk configurable |
Ring frequency: 20-25 Hz | |
Ring waveform: trapezoidal | |
Maximum ringer load: 5 ringer equivalence numbers (RENs) | |
On-hook voltage (tip and ring): -46 to -56V | |
Off-hook current: 18-25 mA | |
Terminating impedance: 600 ohm resistive or 270 ohm + 750 ohm | |
150 nF complex impedance | |
Frequency response: 300-3400 Hz | |
Return loss (600 ohm, 300-3400 Hz): up to 20 dB | |
Insertion loss (1 Vrms at 1 kHz): 3-4 dB | |
Total harmonic distortion (THD) (350 mV peak at 300 Hz): up to 3% | |
Idle channel noise: 72 dB (typical) | |
Longitudinal balance: 55 dB (typical) | |
Off-hook threshold (line seizure): Rdc < 1000 ohm | |
On-hook threshold (line release): Rdc >10000 ohm | |
Rdc DC supervisory range: Rdc > 450 ohm | |
Regulatory compliance | FCC (Part 15 Class B), CE, ICES-003, A-Tick certification, Restriction of Hazardous Substances (RoHS), and UL |
Nguồn cấp | DC input voltage: 5V DC at 2.0A maximum |
Power consumption: 5W | |
Switching type (100-240V) automatic | |
Power adapter: 100-240V and 50-60 Hz (26-34 VA) AC input, with 1.8m cord | |
Indicator lights and LEDs | Phone 1, phone 2, Internet, and power |
Kích thước (W x H x D) | 3.98 x 3.98 x 1.10 in. (101 x 101 x 28 mm) |
Unit weight | 5.40 oz (153 g) |
Operating temperature | 32 to 113ºF (0 to 45ºC) |
Nhà phân phối chính hãng Cisco SPA112
CÔNG TY TNHH GIẢI PHÁP DL TRỰC TUYẾN 3 MIỀN tự hào là đơn vị phân phối chính hãng thiết bị Cisco SPA112 cùng nhiều sản phẩm mạng khác từ thương hiệu Cisco.
Chúng tôi cam kết:
-
Cung cấp hàng chính hãng 100%, đầy đủ CO/CQ.
-
Bảo hành chính hãng 12 tháng.
-
Hỗ trợ tư vấn – lắp đặt – kỹ thuật tận nơi.
-
Dịch vụ nhanh chóng, giá cả cạnh tranh và uy tín.
📌 Thông tin liên hệ:
-
CÔNG TY TNHH GIẢI PHÁP DL TRỰC TUYẾN 3 MIỀN
-
Địa chỉ: T2102, Tòa A5, An Bình City – 232 đường Phạm Văn Đồng – Bắc Từ Liêm – Hà Nội.
-
Điện thoại: 0984.533.910 – 0904.800.458
-
Website: www.thietbimangcisco.com
Review Thiết bị định tuyến Router Cisco SPA112
Chưa có đánh giá nào.